To install solar panels on your home’s roof, you’ll need to follow some basic steps to ensure a proper installation. First, you’ll need to install mounting rails on the roof rafters. These are placed in the appropriate locations and spaced so that they align with the mounting holes on the solar panels. The spacing of the mounting holes is listed on the spec sheet for your panels. Then, you’ll want to add flashings to the mounting rails. These flashings should alternate between the top and bottom rails. This will ensure that the array’s weight is evenly distributed across the entire mounting surface. click for more Look At This
After installing solar panels, you’ll need to connect them to the electrical system. To do this, the installer will run wiring from the panels to the home’s main electrical circuit. This will allow the system to convert the solar energy into electricity. You’ll also need to install a solar inverter, a battery, and a meter that will track how much electricity your solar panels produce. Finally, you’ll connect your system to the city’s electric grid.
The process of solar panel installation starts by preparing the work site. You’ll need to clear the area of any trees, shrubs, or other objects that might interfere with the installation. Once this is done, you’ll need to build scaffolding to support the solar panels. Once the scaffolding is in place, you’ll need to install a mounting system, which supports the base of the panels. You’ll also need screws, nuts, and bolts. The entire process can take a day.
Before your solar array can be turned on, you’ll need to have an inspection by an engineer. This inspection will make sure your solar panels are installed correctly. The inspector will also install a net meter that tracks how much power you produce. If you generate more than you use, you can sell your excess power back to the power grid.
If you are installing solar panels on your roof, you will also need to install the electrical wiring. You should use MC4 connectors to connect the solar panels to the system’s inverter. The inverter can be located either indoors or outdoors. It is usually placed near the main panel for optimal efficiency. However, installing it indoors is better, since it will be cooler.
Once installed, solar panels are easy to maintain. They are protected by glass and are framed with non-corrosive aluminum. They are made to last up to 20 years or more, which is about as long as a tile roof! But they need periodic cleaning. You should clean the panels at least once every six years. Ask the installer about specific cleaning procedures.
Solar systems in New York are eligible for a cash rebate under the NY-Sun program. These rebates are available for residential and commercial solar systems up to 200 kW. The rebate amount depends on your property type and availability of funds. But you may be able to get as much as $1000 for each kilowatt of installed capacity.